000			01900nab a2200217 4500
005			20260520003059.0
008			260224s2012 xxu ing
041			_aInglés
245	0	0	_aInjecting Large Volumes of Preformed Particle Gel for Water Conformance Control
260			_a _b _cnov./dic. 2012
270			_a03/05/2013 ; 03/05/2013
300			_a11 p. ; 941-952
520			_aTraducción del resúmen del autor: This paper describes Preformed Particle Gel (PPG) treatments for in-depth fluid diversion in four injection wells located in the northern section of the Lamadian reservoir, Daqing oilfield, China, which is a sandstone reservoir with thick heterogeneous pay zones. Forty-six producers were connected to the four treated injectors with an average water cut of 95.4% before PPG treatments. A large volume (more than 1 000 m3) of PPG suspension with concentrations of 1900-2 500 mg/L and particle sizes of 0.06-3.0 mm was injected into each well, each injection spanning approximately four months. The injection PPG suspension volumes range from 11458 to 17625 m3 per well with a total of 56269 m3 (295680 lb of dried PPG) for the four wells, which indicated the existence of super-K zones or fractures in the formation. During PPG injection, real-time data, including injection pressure, injection rate and particle sizes, were monitored to tune our treatment design and to analyze the practical status of the mature reservoir. This paper reports detailed information for the four well treatments, including well candidate selection criteria, treatment design, real-time monitoring results during PPG injection and treatment results.
581			_a6
773	0		_tOil and Gas Science and Technology _g67
942			_cARTICULO
100	1		_aBai, Baojun _953095
100	1		_aWei, Mingzhen _953096
100	1		_aLiu, Yuzhang _953097
999			_c187653 _d187653