000			03224nab a2200205 4500
005			20260520000838.0
008			260224s2009 xxu
245	0	0	_aDiffusion-and homogeneous-charge combustion of volatile ethers in a compression ignition engine
260			_a _b _cnov./dic. 2009
270			_a09/06/2010 ; 09/06/2010
300			_a14 p. ; 5865-5878
520			_aTranscripción del resumen del autor. The combustion characteristics of several volatile ether molecules were studied under diffusion and homogeneous charge combustion modes in a compression ignition engine. Volatile ethers of low molecular mass are organic molecules that could be used as fuel for compression ignition engines. The physical and chemical characteristics of such ethers comprise high oxygen content, high volatility, and low viscosity, all of which are conducive to high thermal efficiencies and low pollutant emission during engine operation. It is thought that sootless combustion may be achieved in diffusion flames of high-speed direct injection diesel engines with some volatile ethers, due to their high oxygen content. The formation of oxides of nitrogen from the combustion of ethers may be almost eliminated by the use of lean, homogeneous charge compression ignition combustion, for which these fuel molecules are particularly suitable due to their high volatility. The first part of the experiments examines the combustion characteristics of dimethyl ether under diesel engine diffusion combustion conditions. Heat release of combustion, engine efficiency, gaseous pollutant, and nanoparticle emissions were measured and results were compared with those of conventional diesel fuel at comparable engine operating conditions. It was observed that within the accuracy of the instruments, soot-free combustion could be achieved with pure dimethyl ether in diffusion combustion. The addition of an alkyl ester lubricity-improving additive to dimethyl ether was observed to result in the emission of small nucleation mode nanoparticles (5-40 nm diameter) in the exhaust gas under certain conditions. The experiments suggested that these particles may consist of droplets of the fuel lubricity additive and engine oil forming through condensation. The second part of the experiments investigates the potential of using volatile ethers in direct-injected homogeneous charge compression ignition combustion. The molecular structure of the fuel was observed to have an important influence on the ignition process and heat release characteristics combustion. Several straight-chained and branched ether molecules were used for homogeneous charge compression ignition combustion. The experiments showed that intentional blending of the fuel molecules could be used to achieve homogeneous charge compression ignition combustion at high thermal efficiency, and that the ignition timing of the homogeneous ether-air charge within the cycle could be controlled via the molecular composition of the fuel.
581			_a6
773	0		_tEnergy & fuels _g23
942			_cARTICULO
100	1		_aSchönborn, Alessandro _942361
100	1		_aLadommatos, Nicos _942362
100	1		_aBae, Choongsik _941620
999			_c170829 _d170829