| 000 | 01509nab a2200205 4500 | ||
|---|---|---|---|
| 005 | 20260520000819.0 | ||
| 008 | 260224s2009 xxu | ||
| 245 | 0 | 0 | _aPreparation of an industrial Ni-based catalyst and investigation on CH4/CO2 reforming to syngas |
| 260 |
_a _b _cfeb. 2009 |
||
| 270 | _a15/05/2009 ; 29/04/2009 | ||
| 300 | _a5 p. ; 607-612 | ||
| 520 | _aTranscripción del resúmen publicado por el autor: An industrial cylinder Ni-based catalyst, LaNiOx/ZSM-5 ( = 3 mm), was prepared by a sol-gel method, and its catalytic performance was investigated for CH4/CO2 reforming reaction not only in laboratory scale but also in pilot plant scale. The result revealed that the conversion of CH4 and CO2 was 97% and 94%, respectively, at 850 °C and gas hour space velocity = 1.3 × 103 h-1 and remained a constant in the 100 h range, whereas carbon yield was ca. 5%. The properties of the catalyst were characterized by means of techniques such as X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, high-resolution transmission electron microscopy (HRTEM), temperature-programmed reduction (TPR), and temperature-programmed oxidation (TPO) and compared to those of La2NiO4/MCM-41 and La2NiO4/ -Al2O3 catalysts. | ||
| 773 | 0 |
_tEnergy & fuels _g23 |
|
| 942 | _cARTICULO | ||
| 100 | 1 |
_aTian, L. _941052 |
|
| 100 | 1 |
_aZhao, X.H. _941053 |
|
| 100 | 1 |
_aLiu, B.S. _941054 |
|
| 999 |
_c169665 _d169665 |
||
| 856 | _uhttp://pubs.acs.org/doi/full/10.1021/ef800647n | ||