Biblioteca IAPG Search for 'copydate:"abr./mayo/jun. 2010"'with limit(s): 'suppress:false'

Selecting technologies for onshore LNG production

By Mokhatab, Saeid.
2010 .
7 p. ; 115-121 , For optimal design of LNG production plants, selection of the individual units must be made on the basis of an integrated approach

]]> Place hold on Selecting technologies for onshore LNG production

Optimisation of product yield and coke formation in a RFCC unit

By Sadighi, Sepehr | Reza, Seyyed | Rashidzadeh, Mehdi.
2010 .
6 p. ; 41-46 , Simulation studies of a commercial residue fluid catalytic cracking unit indicate the conditions for an optimum balance of product yield with low coke deposition.

]]> Place hold on Optimisation of product yield and coke formation in a RFCC unit

Designing for sulphur removal and storage:part 1

By Gandhi, Shamim | Chung, Wayne | Nangia, Krish.
2010 .
12 p. ; 75-86 , Selection of technologies for the sulphur block must serve legislative demands and the efficient operation of upstream processes.

]]> Place hold on Designing for sulphur removal and storage:part 1

Online cleaning and decontamination of a butadiene unit

By Polverini, Dino | Cucinelli, Cosimo.
2010 .
6 p. ; 35-40 , Chemical treatment by closed-loop recirculation reduced cleaning time for a butadiene unit turnaround from a typical 20 days to 24 hours

]]> Place hold on Online cleaning and decontamination of a butadiene unit

When MTBE outscores ETBE for bioenergy content

By Dekker, Eelco.
2010 .
8 p. ; 87-94 , If MTBE is produced from biomethanol, its bioenergy content as a fueld additive will be counted twice, according to EU biofuels regulations

]]> Place hold on When MTBE outscores ETBE for bioenergy content

Crude oil selection:optimisation by weight or by volume?

By Pawde, M.D. | Singh, Sachin.
2010 .
8 p. ; 67-74 , The LP model should optimise crude and products in their trading units for accurate assessment of crude oil worth and maximisation of gains from product blending

]]> Place hold on Crude oil selection:optimisation by weight or by volume?

Calculating column relief loads

By Chittibabu, Haribabu | Valli, Amudha | Khanna, Vineet.
2010 .
12 p. ; 55-66 , Conventional, steady-state and dynamic simulation techniques are compared in a study of relief loads for failure modes applied to a distillation column

]]> Place hold on Calculating column relief loads

Anode-grade coke from traditional crudes

By Motaghi, Mitra | Shree, Kanu | Krishnamurthy, Sujatha.
2010 .
6 p. ; 15-20 , A combination of solvent deasphalting and delayed coking is an option to minimise fuel oil production and produce anode-grade coke

]]> Place hold on Anode-grade coke from traditional crudes

Hydrotreating in the production of green diesel

By Egeberg, Rasmus | Michaelsen, Niels | Skyum, Lars.
2010 .
6 p. ; 101-114 , A novel scheme enables co-processing of light gas oil and tall diesel to produce a renewable diesel meeting EN 590 specifications

]]> Place hold on Hydrotreating in the production of green diesel

Microchannel reactors in fuel production

By Atkinson, Derek | McDaniel, Jeff.
2010 .
6 p. ; 95-100 , A demonstration plant aims to confirm the potential for microchannel and other technologies in the distributed production of biofuels

]]> Place hold on Microchannel reactors in fuel production

Planning for carbon capture

By Ferguson, Suzanne.
2010 .
8 p. ; 27-34 , An investment planning roadmap for a project incorporating carbon capture should address the scheme's basic objectives and its viability in the market

]]> Place hold on Planning for carbon capture

Estimation of heat losses from process piping and equipment

By Mokhatab, Saeid.
2010 .
3 p. ; 121-123 , An accessible predictive tool calculates surface heat losses from refinery piping and equipment

]]> Place hold on Estimation of heat losses from process piping and equipment

Optimising steam systems: part 1

By Fleming, Ian.
2010 .
7 p. ; 47-53 , Simple techniques to reduce the cost of ownership of a refinery's steam distribution system and condensate return using steam traps and separators.

]]> Place hold on Optimising steam systems: part 1

Catalytic reforming options and practices

By Zhou, Tom.
2010 .
6 p. ; 21-26 , Design and practice in catalytic reforming is evolving to meet refinery challenges, including lower gasoline pool benzene content and increased demand for hydrogen.

]]> Place hold on Catalytic reforming options and practices