01714nab a2200205 4500 20260520000841.0 260224s2009 xxu Effect of additives on the reduction of PM2.5 emissions furing pulverized coal combustion jul./ago. 2009 15/06/2010 ; 14/06/2010 6 p. ; 3412-3417 Transcripción del resumen del autor. Two bituminous coals used in coal-fired power plants were mixed with either Ca- or Mg-based chemical additives. Coals and the mixtures were burnt in a laboratory-scale drop tube furnace, respectively. The impact of the additives on the transformations of coal minerals, as well as on the emissions of particulate matter with an aerodynamic diameter smaller than 2.5 µm (PM2.5), was investigated. The generated ash particles were collected using a cyclone combined with a low-pressure impactor. The physical and chemical properties of these ash particles were analyzed. The results indicate that the addition of chemical additives can affect the mineral transformation process, and thus, control the emissions of PM2.5 and PM1 during combustion. In particular, additives have a considerable impact on the particle size distribution and chemical composition of PM, wherein it improves the degree of coalescence of submicron and fine mineral particles, which reduces PM2.5 emissions. The effects of additive on the reduction of PM2.5 emissions depend on the type of coals being used. 4 Energy & fuels 23 ARTICULO Ninomiya, Yoshihiko 42607 Wang, Qunying 38151 Xu, Shuyin 42608 170985 170985 0 0 0 0 238804 BAAB BAAB 2026-03-05 200045843 0 200045843 2026-03-05 15:13:22 2026-03-05 ARTICULO