01509nab a2200205 4500 20260520000819.0 260224s2009 xxu Preparation of an industrial Ni-based catalyst and investigation on CH4/CO2 reforming to syngas feb. 2009 15/05/2009 ; 29/04/2009 5 p. ; 607-612 Transcripción del resúmen publicado por el autor: An industrial cylinder Ni-based catalyst, LaNiOx/ZSM-5 ( = 3 mm), was prepared by a sol-gel method, and its catalytic performance was investigated for CH4/CO2 reforming reaction not only in laboratory scale but also in pilot plant scale. The result revealed that the conversion of CH4 and CO2 was 97% and 94%, respectively, at 850 °C and gas hour space velocity = 1.3 × 103 h-1 and remained a constant in the 100 h range, whereas carbon yield was ca. 5%. The properties of the catalyst were characterized by means of techniques such as X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, high-resolution transmission electron microscopy (HRTEM), temperature-programmed reduction (TPR), and temperature-programmed oxidation (TPO) and compared to those of La2NiO4/MCM-41 and La2NiO4/ -Al2O3 catalysts. Energy & fuels 23 ARTICULO Tian, L. 41052 Zhao, X.H. 41053 Liu, B.S. 41054 169665 169665 http://pubs.acs.org/doi/full/10.1021/ef800647n 0 0 0 0 237484 BVIAPG BVIAPG 2026-03-05 200044472 0 200044472 2026-03-05 15:11:54 2026-03-05 ARTICULO