Transcripción del resumen del autor. Field pennycress (Thlaspi arvense L.) oil is evaluated for the first time as a feedstock for biodiesel production. Biodiesel was obtained in 82 wt % yield by a standard transesterification procedure with methanol and sodium methoxide catalyst at 60 °C and an alcohol to oil molar ratio of 6:1. Acid-catalyzed pretreatment to reduce the acid value of crude field pennycress oil resulted in a yield after methanolysis of 94 wt %. Field pennycress oil had high contents of erucic (13(Z)-docosenoic; 32.8 wt %) and linoleic (9(Z),12(Z)-octadecadienoic; 22.4 wt %) acids with other unsaturated fatty acids comprising most of the remaining fatty acid profile. As a result, the methyl esters (biodiesel) obtained from this oil exhibited a high cetane number of 59.8 and excellent low temperature properties, as evidenced by cloud, pour, and cold filter plugging points of -10, -18, and -17 °C, respectively. The kinematic viscosity and oxidative stability (Rancimat method) of field pennycress oil methyl esters were 5.24 mm2/s (40 °C) and 4.4 h (110 °C), respectively. Other fuel properties such as acid value, lubricity, free and total glycerol content, surface tension, as well as sulfur and phosphorus contents were also determined and are discussed in light of biodiesel standards such as ASTM D6751 and EN 14214. Also reported for the first time are cetane numbers of methyl esters of erucic and gondoic (methyl 11(Z)-eicosenoate) acids, which were found to be 74.2 and 73.2, respectively. In summary, field pennycress oil appears to an acceptable feedstock for biodiesel production.

4