Selection of Proper EOR Method for Efficient Matrix Recovery in Naturally Fractured Reservoirs (Record no. 131102)

MARC details
000 -LEADER
fixed length control field 03110nmc a2200205 4500
008 - CÓDIGOS DE INFORMACIÓN DE LONGITUD FIJA - INFORMACIÓN GENERAL
Campo de control de longitud fija 260224s2001 xxu ing
041 ## - IDIOMA
Idioma Inglés
245 00 - TITULO
Título Selection of Proper EOR Method for Efficient Matrix Recovery in Naturally Fractured Reservoirs
Subtítulo SPE 69564
260 ## - PUBLICACION, DISTRIBUCION, ETC
Lugar de publicación, distribución, etc. Dallas, Texas
Nombre de publicador, distribuidor, etc. Society of Petroleum Engineers
Fecha de publicación, distribución, etc. 2001
270 ## - FECHA DE CARGA
Fecha de carga 12/09/06 ; 17/07/01
520 ## - RESUMEN, ETC
Resumen As most of the oil is stored in matrix due to its higher storage capacity than fracture network of naturally fractured reservoirs (NFR), reservoir development plans will aim at maximizing the matrix oil recovery. An enhanced oil recovery (EOR) application principally targets (a) to minimize the residual oil in matrix depleting the matrix as effective as possible and/or (b) to accelerate the recovery rate for rapid production of oil cost efficiently. For reservoirs with high recovery factor, minimizing matrix residual oil saturation is a critical issue to extend the life of the reservoir. For reservoirs with low recovery factor, accelerating the production rate is more vital. For each of these reservoir types, different EOR methods should be considered and implemented accordingly. This paper addresses and discusses these two issues and identifies selection criteria for different EOR methods in NFR, namely chemical (surfactant and polymer) and hot water injection. The focus is specifically on matrix type (permeability and wettability), oil and water viscosities, matrix boundary conditions, transfer type (co- or counter-current imbibition), and IFT. For the different values of these properties, the most proper injection fluid type to be used as an EOR fluid is identified to obtain an effective matrix recovery. Co-current and counter-current capillary imbibition experiments at static conditions are conducted to show how effective and how useful these applications are for different rock and fluid types and matrix boundary conditions. For experimentation, strongly water wet Berea Sandstones and oil-wet carbonates (cores from an oil formation) are used. Light crude oil, kerosene and engine oil are selected as the oleic phase. Proper project implementation (adjustment of injection rate and/or concentrations) and selection of the injection fluid for a cost efficient management are also discussed for different conditions outlined above. Finally, the selection criteria of EOR methods based on the rock and fluid properties are defined. This will provide an insight into an effective management of NFRs and reservoir depletion strategies, if the matrix oil recovery is the main target.
942 ## - DESC. DE MATERIAL
Tipo de item KOHA Congresos (trabajos presentados)
100 1# - RESPONSABLE PERSONAL
Apellido, Nombre Babadagli, T.
9 (RLIN) 6312
111 2# - AUTORIDAD DE CONGRESO
Nombre de congreso Latin American and Caribbean Petroleum Engineering Conference (7th : 2001 mar. 25-28 : Buenos Aires, Argentina)
9 (RLIN) 5738
711 2# - ENTRADA AGREGADA--NOMBRE DE REUNIÓN
Nombre de congreso/reunión o jurisdicción como elemento de entrada Latin American and Caribbean Petroleum Engineering Conference (7th : 2001 mar. 25-28 : Buenos Aires, Argentina)
800 1# - RESPONSABLE EDICION
Nombre Babadagli, T.
9 (RLIN) 6312
856 ## - LINK
Link <a href="https://biblioteca.iapg.org.ar/ArchivosAdjuntos/LACPEC2001/Spe69564.pdf">https://biblioteca.iapg.org.ar/ArchivosAdjuntos/LACPEC2001/Spe69564.pdf</a>
711 2# - ENTRADA AGREGADA--NOMBRE DE REUNIÓN
-- 5738
Holdings
Biblioteca propietaria Biblioteca actual Fecha de adquisición Inventario Total de préstamos Inventario Fecha de carga Tipo de item KOHA
Biblioteca virtual Biblioteca virtual 03/03/2026 200003167   200003167 03/03/2026 Archivo electrónico


Instituto Argentino del Petróleo y del Gas
Maipú 639 (C1006ACG) – Buenos Aires – Argentina
Tel: (54 11) 5277 IAPG (4274)
Lu - Vie 11 a 17 hs
Mail: biblio@iapg.org.ar


Copyright © 2026, Instituto Argentino del Petróleo y del Gas, todos los derechos reservados.

Protección de datos personales